Top 10 typical forklift mishaps ， forklift procedure must take notice of these issues ！.

Top 10 typical forklift mishaps ， forklift procedure must take notice of these issues ！.

Blog Article

Do not take too lightly the forklift at the office. If the operation is not good, there will be severe crashes in mins, and there are several crashes entailing forklifts.

Instance 1: The forklift freight obstructed the vehicle driver's view, and the individual ahead can not be discovered, leading to a moving mishap.
Situation 2: In order to preserve the balance of the forklift when lifting heavy items, the staff members utilized their body weight as the weight, which nearly triggered casualties.
Situation 3: The width of the forklift cargo goes beyond the allowed size of the path and hangs on the roadside rack, which virtually triggers an mishap.
Case 4: Forklift is speeding and surrender throughout a turn.
Situation 5: The forklift chauffeur did not notice the pedestrian, and the pedestrian did not see the forklift.
Instance 6: The forklift lifts the personnel unlawfully, the forklift motorist does not use the seat belt, the forklift lifter drops and the motorist is crushed when the forklift surrender.
Situation 7: The forklift chauffeur did not wear a safety belt and fell from the vehicle when it surrendered and was crushed.
Forklift procedure must focus on these matters ：.

Beginning.
1. Before beginning, observe the surroundings, and after confirming that there are no challenges that hinder the safety and security of driving, honk the horn initially and after that start.
2. For automobiles with hydraulic (air pressure) brakes, the brake hydraulic stress (air pressure) scale must be secure before beginning.
3. When the forklift starts with a tons, the vehicle driver needs to first verify that the lots is stable and dependable.
4. The beginning must be sluggish and stable.

Driving.
1. When driving, the height between the bottom end of the fork and the ground should be kept at 300mm-400mm, and the mast must be slanted backwards. .
2. Do not lift the fork expensive when driving. When getting in and leaving the task website or while driving, beware that there will be no obstacles overhead. When the tons is taking a trip, the fork needs to not be increased too expensive, which will impact the security of the forklift. .
3. After dumping, the fork ought to be lowered to the typical driving position before driving. .
4. When transforming, if there are pedestrians or automobiles close by, the driving signal should be issued initially. High-speed doglegs are restricted. High-speed doglegs will create the vehicle to shed lateral security and topple. .
5. When the forklift is downhill, it is purely prohibited to switch off the flame and slide, and it is prohibited to brake suddenly while driving with lots unless there are unique conditions.
6. When the forklift is running, it needs to obey the traffic rules in the manufacturing facility and should maintain a certain safety range from the automobile ahead. .
7. When the forklift is running, the tons has to be in the lowest placement that does not prevent the driving, and the gantry needs to be correctly slanted back. The tons will not be increased other than when stacking or packing. .
8. The height of the load must not block the vehicle driver's view. In unique scenarios, when the item affects the forward vision, drive at a low speed when reversing.
9. It is forbidden to turn on the ramp, nor to drive across the ramp. .
10. The risk-free driving speed of the forklift in the factory area is 5 km/h, and it needs to drive securely at a reduced rate when entering the manufacturing workshop area. .
11. When the forklift is lifted, lifted or Electric Forklift Truck for Warehouse driven, it is forbidden for employees to base on the fork to hold items and play a stabilizing function. .
12. If problems are located, they will be fixed and reported in a prompt way, and they will never operate with health problems or hide them.

packing and dumping.
1. When fork-loading products, the range in between the two forks should be adjusted as needed to make the load of the two forks balanced and not skewed, and one side of the product should protest the shelf. .
2. It is restricted to work with a single fork or make use of a fork top or pull. In special situations, safety and security indication must be established to remind bordering pedestrians. .
3. In the process of loading and discharging products, the forklift should be stopped with the brake. .
4. The speed of the car should be slow-moving and consistent. Be careful not to roll the wheels on the dunnage, so as not to stretch the rolled items and harm people. .
5. When using a fork to fork the goods, the fork should be as deep as feasible under the load, and it ought to be kept in mind that the fork tip must not touch various other products or things. The lots ought to be stabilized with very little back tilt of the gantry to make sure that the lots does not slide backwards. The mast can be tilted onward slightly when the tons is lowered to enable easy placement of the lots and extraction of the forks. .
6. It is prohibited to fork goods at high speed and collide with difficult things with the fork head. .
7. When the forklift is functioning, it is forbidden for people to stand around the fork, so as to stay clear of the collapse of the goods and injure people. .
8. Overloading is forbidden, and it is forbidden to use forks to lift employees to engage in high-altitude procedures to stay clear of high-altitude falling accidents. .
9. It is not enabled to make use of the brake inertia to slip, put, round or roll objects. .
10. It is not enabled to use forks to choose, transform pallet discharge.

Leaving .
1. It is forbidden to leave the forklift when the items on the fork are in the air. Before leaving the forklift, you have to discharge the goods or reduced the fork structure.
2. Pull the parking brake deal with to dead or dispirit the parking brake switch.
3. The engine is turned off and the power is removed. (Except for special circumstances, such as the driver does not leave the vehicle's view and does not go beyond 1 min).
4. Eliminate the trick. .

Forklift Operation Precautions.
1. Before and after the forklift operation, the look must be inspected, and gas, lubing oil and cooling water need to be added.
2. Check the safety and security performance of beginning, running and stopping.
3. Inspect whether the lights and horn signals are full and reliable.
4. During the procedure of the forklift, check whether the pressure and temperature are normal.
5. After the forklift is running, the external leakage needs to likewise be checked and the seals should be replaced in time.

Forklift Safety Operation Specifications.
1. You have to check before leaving the automobile;.
2. When you experience somebody in front of you during driving, you ought to send a signal at a distance of 5 m;.
3. The driving rate in the factory does not go beyond 5 km/h;.
4. When driving, the low point of the freight must be 0.3 m ~ 0.4 m in the air;.
5. The turning must not be too sharp to stop the tendency of " complimentary turning";.
6. Adding and down the incline needs to be slow-moving and consistent, and no activating the incline is enabled.
7. Do not drive across the slope. When the gradient is greater than 10%, the car must be driven in reverse when worsening;.
8. When the forklift workers lug the goods and progress, if they run into huge or heavy goods and go to the motorist's line of sight, they ought to take the reversing workout
.
The "Eight Prohibitions" ought to be complied with in the procedure.
1. Single fork procedure is not permitted.
2. It is not allowed to lift the goods for far away driving.
3. It is not permitted to grab Stand-on Electric Pallet Stacker the goods by handing over the pallet with the fork.
4. It is not allowed to directly shovel chemicals, flammables and other hazardous chemicals with forks.
5. It is not permitted to make use of inertia force to get the goods.
6. It is not allowed to make use of stopping pressure to expatriation round or easy-to-roll objects.
7. It is not allowed to bring people to work on the pallet or fork, and it is purely prohibited to stand under the fork after the fork is raised.
8. Do not drive laterally on inclines
.
Car park is not allowed under the list below problems.
1. Curves, slim roadways, train crossings;.
2. Areas with a longitudinal incline higher than 5%.
3. When there is an barrier on one side of the roadway, the opposite side of the area with the very same length as the obstacle ought to be within 20 meters at each end.

Web：https://www.onenforklifts.com/
Email：info2@onen.cn
Phone：+86 13827083844